Introduction
Over the last few years, the interest for connecting computers and computer supported devices to wireless networks has steadily increased. Computers are becoming more and more seamlessly integrated with everyday equipment and prices are dropping. At the same time wireless networking technologies, such as Bluetooth and IEEE 802.11b WLAN , are emerging. This gives rise to many new fascinating scenarios in areas such as health care, safety and security, transportation, and processing industry. Small devices such as sensors can be connected to an existing network infrastructure such as the global Internet, and monitored from anywhere.
The Internet technology has proven itself flexible enough to incorporate the changing network environments of the past few decades. While originally developed for low speed networks such as the ARPANET, the Internet technology today runs over a large spectrum of link technologies with vastly different characteristics in terms of bandwidth and bit error rate. It is highly advantageous to use the existing Internet technology in the wireless networks of tomorrow since a large amount of applications using the Internet technology have been developed. Also, the large connectivity of the global Internet is a strong incentive.
Since small devices such as sensors are often required to be physically small and inexpensive, an implementation of the Internet protocols will have to deal with having limited computing resources and memory. This report describes the design and implementation of a small TCP/IP stack called lwIP that is small enough to be used in minimal systems.
Overview
As in many other TCP/IP implementations, the layered protocol design has served as a guide for the design of the implementation of lwIP. Each protocol is implemented as its own module, with a few functions acting as entry points into each protocol. Even though the protocols are implemented separately, some layer violations are made, as discussed above, in order to improve performance both in terms of processing speed and memory usage. For example, when verifying the checksum of an incoming TCP segment and when demultiplexing a segment, the source and destination IP addresses of the segment has to be known by the TCP module. Instead of passing these addresses to TCP by the means of a function call, the TCP module is aware of the structure of the IP header, and can therefore extract this information by itself.
lwIP consists of several modules. Apart from the modules implementing the TCP/IP protocols (IP, ICMP, UDP, and TCP) a number of support modules are implemented.
The support modules consists of :-
" The operating system emulation layer (described in Chapter3)
" The buffer and memory management subsystems
(described in Chapter 4)
" Network interface functions (described in Chapter 5)
" Functions for computing Internet checksum (Chapter 6)
" An abstract API (described in Chapter 8 )
Introduction
In today's information age it is not difficult to collect data about an individual and use that information to exercise control over the individual. Individuals generally do not want others to have personal information about them unless they decide to reveal it. With the rapid development of technology, it is more difficult to maintain the levels of privacy citizens knew in the past. In this context, data security has become an inevitable feature. Conventional methods of identification based on possession of ID cards or exclusive knowledge like social security number or a password are not altogether reliable. ID cards can be almost lost, forged or misplaced: passwords can be forgotten.
Such that an unauthorized user may be able to break into an account with little effort. So it is need to ensure denial of access to classified data by unauthorized persons. Biometric technology has now become a viable alternative to traditional identification systems because of its tremendous accuracy and speed. Biometric system automatically verifies or recognizes the identity of a living person based on physiological or behavioral characteristics.
Since the persons to be identified should be physically present at the point of identification, biometric techniques gives high security for the sensitive information stored in mainframes or to avoid fraudulent use of ATMs. This paper explores the concept of Iris recognition which is one of the most popular biometric techniques. This technology finds applications in diverse fields.
Biometrics - Future Of Identity
Biometric dates back to ancient Egyptians who measured people to identify them. Biometric devices have three primary components.
1. Automated mechanism that scans and captures a digital or analog image of a living personal characteristic
2. Compression, processing, storage and comparison of image with a stored data.
3. Interfaces with application systems.
A biometric system can be divided into two stages: the enrolment module and the identification module. The enrolment module is responsible for training the system to identity a given person. During an enrolment stage, a biometric sensor scans the person's physiognomy to create a digital representation. A feature extractor processes the representation to generate a more compact and expressive representation called a template. For an iris image these include the various visible characteristics of the iris such as contraction, Furrows, pits, rings etc. The template for each user is stored in a biometric system database.
The identification module is responsible for recognizing the person. During the identification stage, the biometric sensor captures the characteristics of the person to be identified and converts it into the same digital format as the template. The resulting template is fed to the feature matcher, which compares it against the stored template to determine whether the two templates match.
The identification can be in the form of verification, authenticating a claimed identity or recognition, determining the identity of a person from a database of known persons. In a verification system, when the captured characteristic and the stored template of the claimed identity are the same, the system concludes that the claimed identity is correct. In a recognition system, when the captured characteristic and one of the stored templates are the same, the system identifies the person with matching template.
Introduction
While Internet technologies largely succeed in overcoming the barriers of time and distance, existing Internet technologies have yet to fully accommodate the increasing mobile computer usage. A promising technology used to eliminate this current barrier is Mobile IP. The emerging 3G mobile networks are set to make a huge difference to the international business community. 3G networks will provide sufficient bandwidth to run most of the business computer applications while still providing a reasonable user experience.
However, 3G networks are not based on only one standard, but a set of radio technology standards such as cdma2000, EDGE and WCDMA. It is easy to foresee that the mobile user from time to time also would like to connect to fixed broadband networks, wireless LANs and, mixtures of new technologies such as Bluetooth associated to e.g. cable TV and DSL access points.
In this light, a common macro mobility management framework is required in order to allow mobile users to roam between different access networks with little or no manual intervention. (Micro mobility issues such as radio specific mobility enhancements are supposed to be handled within the specific radio technology.) IETF has created the Mobile IP standard for this purpose.
Mobile IP is different compared to other efforts for doing mobility management in the sense that it is not tied to one specific access technology. In earlier mobile cellular standards, such as GSM, the radio resource and mobility management was integrated vertically into one system. The same is also true for mobile packet data standards such as CDPD, Cellular Digital Packet Data and the internal packet data mobility protocol (GTP/MAP) of GPRS/UMTS networks. This vertical mobility management property is also inherent for the increasingly popular 802.11 Wireless LAN standard.
Mobile IP can be seen as the least common mobility denominator - providing seamless macro mobility solutions among the diversity of accesses. Mobile IP is defining a Home Agent as an anchor point with which the mobile client always has a relationship, and a Foreign Agent, which acts as the local tunnel-endpoint at the access network where the mobile client is visiting. Depending on which network the mobile client is currently visiting; its point of attachment Foreign Agent) may change. At each point of attachment, Mobile IP either requires the availability of a standalone Foreign Agent or the usage of a Co-located care-of address in the mobile client itself.
The concept of "Mobility" or "packet data mobility", means different things depending on what context the word is used within. In a wireless or fixed environment, there are many different ways of implementing partial or full mobility and roaming services. The most common ways of implementing mobility (discrete mobility or IP roaming service) support in today's IP networking environments includes simple "PPP dial-up" as well as company internal mobility solutions implemented by means of renewal of IP address at each new point of attachment. The most commonly deployed way of supporting remote access users in today's Internet is to utilize the public telephone network (fixed or mobile) and to use the PPP dial-up functionality.
